The Keep - Rough Cuts

I decided to work on my Keep tonight. Of course, I will do floor plan maps, but tonight, I want to work on the model itself. I'm starting with the crenelation. You'll probably notice that this is bad form, I am making a model with no paper plans, then making a floor plan from an unscaled model. Hmmm... It could work.

To create the crenelations, I "measured" out the walls. I came up with 2 different numbers. 3 inches and 3 1/4 inches. Not bad considering the source of my Styrofoam was upcycled packing material. It wasn't going to be square no matter what I did.

I divided the wall section into five parts, a classic looking crenelation. 3 parts will be empty, 2 parts filled and then the 4 corners of unmeasured sizes. That works out to be about 9 1/16ths for the 3 inch sections and 10 1/16ths for the 3 1/4 walls. Small enough not to matter.

I put an x on the parts that would be cut away. One of the issues with this method is, I have no scale in mind. My brain defaults to 1 inch equals 6 feet, so a cut out of 10 1/16ths is going to be 3.75 feet. So this is 25 mm. This is pretty good, as most of my figures are 28mm. Oh... My brain is so broken.

Anyway, forget scale. I want this to look nice rather than be a particular size.

Although the Keep will not have a scale,
the cat is as close to 1:1 scale as it could get it.
Your cat may vary. 

Let's get cutting. I'm using scraper handled razor. I want to push down on the line. It turns out this cutter was bad for what I was doing and I switched it up with a boxing razor.

The straight down cut allows me to work in two angled cuts. Again, I am not working for a "scale", so I didn't measure how deep I went. I'm guessing that it's also about 3.75 feet in scale.

Let me give you two tips when cutting. First, unless you have a cutting table, work on a finished surface like a table. Wipe it down with a wet rag and do not it dry. The water will make the base of the Keep stick and all of the bits of Styrofoam will also stay in place.. This makes clean up easy. Dry, unfinished wood will also stick to Styrofoam, so that is an option, too.

These look like teeth. The blade is semi flexible, so I can force it into the soft Styrofoam, and end up with a straight cut and a flat surface on the bottom.

As you can see from the pictures, I have some basal wood pushed into the Styrofoam as a floor. I need to plan my details before the next step, which is going to force me to pick a scale. Judging by the size, this Keep will be nothing like a real world Keep. It is all out of proportion.

But I am happy with my results as of now. More tomorrow, I think.

Elven Fire, 4th Level Magic User Spell

Elven Fire

Level: 4                                                                                                    Components: V, S, M
Range: 10"+1 per level                                                                            Casting time: 3 segment
Duration: Instant                                                                                      Saving Throw: Special
Area of Effect: One creature per level over 4

Elven Fire, like Greek fire is named for the culture that created it. The Elven Fire Spell will create one small bomb like projectile per level of the caster. These projectiles have a curious property that causes them to move away from objects and in to any open space. The magic user can force them into contact with a target by making a to hit roll at a -2. Each projectile does 1d6 points of damage, unless the target saves verse spells. A saving throw will reduce the damage by half. A target is entitled to a save for every projectile that hits them. Monks cannot deflect these projectiles but can dodge them. 

It is impossible for a miss to strike another object as they are keyed to a particular set of targets. Any misses will fizzle out as the go by the intended target. The magic user must declare targets at the moment of casting. They may redirect these missiles between the selected targets, but not add more targets as the combat round progresses. For example if a 5th level magic user targeted 2 ogres, if the projectiles downed the 1st ogre they could redirect all remaining missiles to the second ogre, but could not target a goblin that stepped out of hiding, mid-round.  

Initially, the caster will only be able to attack one target with an overwhelming barrage of 4 projectiles. At level each subsequent level, they can attack one more target. A 9th level magic user could attack up to 5 targets with 9 projectiles total, however they are not required to do so. The maximum range for a 9th level caster would be 19". 

Rather than burst like a fireball spell, Elven Fire will envelope the target. Although the projectile appears to as a flaming object, it is a magical force that will not ignite flammable items. While they appear as burning projectiles, they are not a good light source; they are only as bright as a torch. Each one will fizzle out in a single segment, whether they strike or not. 

Elven Fire will function underwater with no modification. Elven Fire does not do fire damage, so regenerating creatures will continue to do so after being damaged. 

Character Sheet for AD&D and Unearthed Arcana Update

It's done, it's done! I have updated my Character Sheet for AD&D and Unearthed Arcana. This second character sheet is an all new, digital creation using Claris on a 1999 G4 Sawtooth Mac.

This file is in addition to the scan of my AD&D sheet from the 80's. Being an all digital file instead of a scan, the sheet is much sharper when printed. If I keep creating new versions, I may have to rename this offering to something more descriptive.

It is available on DriveThruRPG as a PWYW title. If you have already downloaded, you should have an email with a link to your library. If you are not subscribed to email via DriveThru, merely log in and click the Library tab to get the new file.

These free updates will probably be part of a series, so you can expect more from your initial purchase. If you already tried it, let me know what you think either with a comment or a review. I'd love to hear from you. 

If you are new to the this product, click the link above to order it. Remember, it's PWYW, so give it a try in your campaign before dropping some GP in the tip jar.

Don't forget to try out my other products:

Swashbuckler Character Class.
Zero to Hero: Uncommon Commoners.
The Compass Rose Inn Minisetting.
Kobold's Folly.

The Housekeeping and Distraction Post

My first experience with podcasts was way back in 2006, with the Astronomy Cast podcast. Hosted by Dr. Pamela Gay and Fraser Cain, it was and still is a fascinating journey into not only Astronomy but the power of the web.

With that first episode on Pluto, I was hooked on podcasts.

I skipped around here and there looking for new material and have been through dozens of podcasts.

Lately, I have picked up on the OSR type podcasts and feel that my handle on the hobby is much better for it. You can mouse over each picture for the podcast name (including Astronomy Cast above) and click it as a link to the associated blog for each Podcast. I'm not going in any order, except the last podcast.

The first 'cast is by Vb Wyrde and he talks about game systems and creation. It's kind of heady stuff as he really digs into the hows and whys of various system's mechanics. This is a companion piece to his websites.

Next up is the Playing Wrong Podcast, with the lovable wizard pig. I like to think of it as the Cow-Dog of the OSR. This week's entry is about social media vs. content, which is kind of a big deal these days. On a tangential but parallel line of though, Dyson Logos has been talking about his experience on Facebook, which is not the most optimal platform to work from. You can also check out the link above labeled "The Tek" to see all kinds of statics about my website and downloads. 

The Red Dice Diaries is an excellent podcast which should have decidedly British slant, but actually is rather cosmopolitan in nature. I love John's ideas and point of view, plus he brings in a collection of guests to talk about their experiences at the tabletop. The episodes I found most enlightening were ones on a game that I always wanted to pick up, called Burning Wheel.

A rather new podcast is SAFCOcast. It covers Gurps and Traveller and a whole lot more. I like this one as it is hosted by a group rather than an individual. I don't get a lot time to play and I find this podcast satisfies my Science Fiction itch. I just wish I had more time to play some of those other games.

Maybe, some day.

Who has the time to read every blog under the sun? Oddly, the Thought Eater does. Take a listen to Jeremy's weekly Wednesday round up of the blog-o-verse. Jeremy is comprehensive, you can have two weeks of content to read over from just one listen.

Also, on Friday's he a short, 5ish minute show where he lets fly with his latest thoughts on the OSR.

Do Jeremy, me, and you a favor. If you run a podcast or blog, put your name on it. Or at least a good handle. It helps us find you.

The last OSR Podcast has a special place in my heart. It's called Blogs on Tape. It is intended to as readings of the Best of Blogs.

What I see is accessibility. I've toyed with the idea of a podcast myself, but what I really want is a presentation so that people with poor vision can access blogs in the easiest, most natural format, the human voice. No place does Blogs on Tape mention this as a priority, but it is what they are doing. I love it.

If you want some insight as to why I would want this for my site, take a look at this semi-autobiographical short story I wrote. Most of it is fiction, but much of it is true.

If you want your blog or podcast featured here, feel free to shoot me a note at phil(dot)viverito(@)gmail(period)com or add a comment below. I'd love to add your content. Also, I would be remiss if I didn't mention the wonderful Old School RPG Planet which reblogs your content. It is an excellent idea.

I apologize for the mess in the right column, I'm trying to add a graphical podcast list over there and ran out of energy. There is only so much coffee I can drink, and I need to stop casting from hit points.

Cleaning up and decorating

I'm cleaning up after making a mess with styrofoam this morning and getting some artwork ready for my new game room. Little touches right now. 

This is a book by Nate Treme and you can get it from his website. I am not sure if there are any physical copies left, but you can print your own. It's great, check out my review, here.

Right now, I just caught a newsflash that The Midderlands Expansion by Monkey Blood is free today. I was going to take a pass on it, but the article mentions that it contains a new map. Ah... more artwork for my game room. Check it out, but hurry!

Getting to it

Recently, I posted images of my dad's work in the form of the Shell Keep and the Crusader Castle. I've seen this done dozens of times. I don't have these skills myself, because I don't practice these skills. Maybe it's time to change that.

I pulled together some scraps of stuff I had lying around and got started. I want a castle, but maybe I should start smaller with some houses.

The larger structure will be a keep. Perhaps in a motte and bailey design. Or maybe it will simply be free standing. Not sure where I'm going with this, but the effort is fun.