#MiniatureMonday

I know #MiniatureModay two days off, but I found these guys while cleaning the basement.

I only found five so far, but 5 minis a week, for 52 weeks is 260 figures a year. I'll never hit that if I don't start now. 5 a week isn't that hard to hit.

The Research Game - Stave Churches

In my prior post, I began work on a building I could not identify. It turns out that this structure is a stave church from 11-1200 A.D.

I wasn't able to identify it specifically, nor was I able to place it the category of stave church. For some reason, I picture stave churches as having gracefully sloping walls and roofs, like so:

So, I am off to do some research. I have to say my dad, Philip J. Viverito, instilled a quest for knowledge in me. Using the internet, I was able to found some remarkable resources for this project in rather short order. I cannot image how my dad did it back in the 1970's and 80's with only books to work from.

One of the more impressive items I found was a short video filmed in 2000 at Uvdal Stave Church, Nore and Uvdal, Norway.

Not only is the church beautiful, the video itself is excellent. The film was put together by Erik Meyn, and the music was composed and performed by Ulf Meyn. The original publisher was Numedalsnett AS.

Although there is no speaking, this is a wonderful educational resource.

Back into Scale Models

It has been a very long time since I have worked on a model. My dad gave me a couple of his older buildings and I intend to fix them as they haven't held up with children and age. I started with some photos to get an idea of how to start.

Edit - This building is a stave church, which is different from my expectations. I picture stave churches as having graceful sloped components. Now I am off to research more on the topic. Please see my next post.

Front view (click image to enlarge)	Rear view(click image to enlarge)	Side view(click image to enlarge)

Looking at the damage, I wanted to make a copy first. I took some measurements and sketched out a plan.

Front view (click image to enlarge)	Side view(click image to enlarge)

I am using I intended to work with balsa wood, but bass wood was the only type available. It is much harder. So using the drawings above, I cut my lengths of wood for the frame and matched them up to the sketch.

Front view (click image to enlarge)	Side view(click image to enlarge)

And the first problem presented itself. I had measure, sketched, and measured again. The beams are 1/4 inch. I purchased 5/16 inch dowels. That is close, but no cigar.

Since I have a scanner, I quickly ran copies and corrected the sketches.

Front view (click image to enlarge)	Side view(click image to enlarge)

What I decided was to extend the beams inwards and upwards. Now I have an idea of where to go. 

Tomorrow, I will make a base and start gluing. Look for more updates shortly. 

SFB Scrapyard Sack

I ordered Amarillo Design Bureau’s Scrapyard Sack.

What did I get? I don’t know, but I love it.

There are several intact ships – A Kzinti ship, a Kzinti Tug, 3 Federation CA style ships, an AUX carrier and a B10 Boom. The small Aux carrier, the B10 Boom and the Kzinti Tug are pretty much ready to go, I could clean them up and paint them now. The others will require a smidgen of creativity to get into action.

Additional items are 6 Federation engines, matched in left-right pairs. 4 Federation frigate engines and lower hulls, an extra CA style hull with engines, a Federation hull with no engines or bridge, and a pair of Klingon wing disruptors or engines.

And in the middle is a nearly complete hull of something I can’t identify.

All and all, I am very happy with my scrapyard sack.

UPDATE: David McGuire over on Google+ gave me some hints:

"Without a closer look, the center one may be a NCL. Or on the outside, maybe the DN minus the body or the Federation version of the B10"

Good Things from ADB, Inc.

They have updated prices on the Starline 2500 range of minis. A quick look at the list shows about half the ships (or more) have dropped in price significantly. Of course, this the flip side is some ships have increased in price by a fair amount. When I say fair, I mean that some jumped bucks to $19 or more for large battleships.

I haven’t crunched any numbers, but at a quick glance, half the ships are much cheaper, many stayed the same and a few very large models had a modest price increase. Going from memory, I think that some smaller models are one third the original price. Additionally, the company is heading towards all metal ships again.

I love this. I can’t wait to place my order.