Game Review - G.A.S.L.I.G.H.T.: Glorious Adventures in Science Loosely Involving Generally Historical Times

Title:  G.A.S.L.I.G.H.T.: Glorious Adventures in Science Loosely involving Generally Historical Times
Author: Christopher Palmer and John R. "Buck" Surdu
Rule Set: G.A.S.L.I.G.H.T.
Year: 1984
Pages: 36
Number of Players: 2+
Rating: ★★★★★

I stumbled across this 2000 printing of  G.A.S.L.I.G.H.T., a game of Victoria hi-jinx. On the first reading, it strikes me as a Victorian era Striker game. You create your hero, his extras, etc. and then go off to encounter something. It could be just like Chainmail with a few differences.

It's decidedly different. You'd think that the rules revolve around the hero but you'd be wrong. All that nonsense stops at page 7 when you get to design vehicles. The meat of the system revolves around modular system to create vehicles, monsters, and other contraptions right of the serials of the 1860s. It's nuts! Steampowered villains against dragoons and kung-fu powered fighters? Go for it!

I love it.

Now for this game, you'll want oodles and oodles of minis. It'd be expensive, except the rules seem to assume that you obtained your kit from the 99 cent store. Bags of dinosaurs, robots, spaceships, cars, tanks and those weird erector set want-a-be things from Dollar Tree would do nicely. You can match your designs to your minis which is awesome.

Once you have designed and assembled your minions, you need to build a deck of cards. This feature reminds me of The Sword and The Flame. The deck controls who goes when. Nerve racking. The system proceeds down the order of battle: card draw, morale, shooting/throwing, move, reload, lather, rinse, repeat.

The rules are simple, because things get hectic fast.
While I have reviewed the original set here on These Old Games, you can obtain a completely updated set over at DriveThruRPG. The Compendium runs 190 pages, which is quiet an update from 36. If you want the 36 page set, check out Amazon. (It lists 40 pages, which includes the covers, and the inside covers which are also packed with information. I went by the actual numbered pages.)

You should check out Buck's webpage. It's old school awesome.

Oh, G-d damn. It's always the scale and basing with you people. Movement for infantry 6" and for cavalry is 12". Looks like HO, 28 mm, 1/72, 1/76 or something like that. Formations are wavy lines and blobs, so basing doesn't matter except perhaps for one figure per base.

What I do on Sunday... Achieve!

I'm in cleaning mode. Well, my wife is in cleaning mode for the holidays. She is also a good photographer and has a nice camera. She has promised that I can borrow her camera, if I get all of the Christmas stuff upstairs and do some laundry.

Deal.

What do I need the camera for? Two semesters ago, I had to put together a video for a class project. I decided to cover the Battle of Rorke's Drift using minis I had on hand. Being me, I couldn't just do a PowerPoint, it was stop motion all the way.

Proof of concept video

Oh, but I couldn't stop there. I wanted actual students to participate. So I nervously packed up all of my figures and terrain and brought them into my 6:1:3 classroom. I have to say, my staff really didn't understand what was happening, but they did their best to help.

At the end of the day, I found that my lesson plans were wildly out of spec for 6 student with autism, so I brought in the NPC Players to help me out. The NPC Players are my children, Nathan, Catherine and Paul. I asked them to read the script which were based of social studies lesson plans I presented in my classroom. Since my children couldn't come into my classroom due to various privacy and safety concerns, I had to work backwards and sideways to create script based of adapted lesson plans for 10 year olds. Every evening for weeks, the NPC Players and I tried to make the script come to life in stop motion form.

I got an A on this assignment, but I honestly don't believe my professor had a good handle on how much I achieved. One teacher, one teaching assistant, 2 classroom aides (sometimes different people), 6 10 year old students, who happen have autism remotely working with 3 typical middle and high school students, all working together to produce an understandably scripted video and associated adapted lesson plans to meet my professor's college class standards. It was quite an achievement.

At the end of the day, it was a bridge to far. The audio we worked so hard to produce bombed big time. But I would totally do it again. I think my students and children gave a great grasp of the historical event.


One last task has remained undone since the end of the project. The clean up. 9 kids and 4+ adults made a hash of my models. A mess that remains to this day.

Over the Christmas break, I plan on reorganizing my models and post images of them here.

Here are some examples images of random figures from the jumbled hash.

The Keep - Rough Cuts

I decided to work on my Keep tonight. Of course, I will do floor plan maps, but tonight, I want to work on the model itself. I'm starting with the crenelation. You'll probably notice that this is bad form, I am making a model with no paper plans, then making a floor plan from an unscaled model. Hmmm... It could work.

To create the crenelations, I "measured" out the walls. I came up with 2 different numbers. 3 inches and 3 1/4 inches. Not bad considering the source of my Styrofoam was upcycled packing material. It wasn't going to be square no matter what I did.

I divided the wall section into five parts, a classic looking crenelation. 3 parts will be empty, 2 parts filled and then the 4 corners of unmeasured sizes. That works out to be about 9 1/16ths for the 3 inch sections and 10 1/16ths for the 3 1/4 walls. Small enough not to matter.

I put an x on the parts that would be cut away. One of the issues with this method is, I have no scale in mind. My brain defaults to 1 inch equals 6 feet, so a cut out of 10 1/16ths is going to be 3.75 feet. So this is 25 mm. This is pretty good, as most of my figures are 28mm. Oh... My brain is so broken.

Anyway, forget scale. I want this to look nice rather than be a particular size.

Although the Keep will not have a scale,
the cat is as close to 1:1 scale as it could get it.
Your cat may vary. 

Let's get cutting. I'm using scraper handled razor. I want to push down on the line. It turns out this cutter was bad for what I was doing and I switched it up with a boxing razor.

The straight down cut allows me to work in two angled cuts. Again, I am not working for a "scale", so I didn't measure how deep I went. I'm guessing that it's also about 3.75 feet in scale.

Let me give you two tips when cutting. First, unless you have a cutting table, work on a finished surface like a table. Wipe it down with a wet rag and do not it dry. The water will make the base of the Keep stick and all of the bits of Styrofoam will also stay in place.. This makes clean up easy. Dry, unfinished wood will also stick to Styrofoam, so that is an option, too.

These look like teeth. The blade is semi flexible, so I can force it into the soft Styrofoam, and end up with a straight cut and a flat surface on the bottom.

As you can see from the pictures, I have some basal wood pushed into the Styrofoam as a floor. I need to plan my details before the next step, which is going to force me to pick a scale. Judging by the size, this Keep will be nothing like a real world Keep. It is all out of proportion.

But I am happy with my results as of now. More tomorrow, I think.

How about a Crusader Castle?

Dad is a busy guy. How about a tour of a Crusader Castle today?

Mom and Dad live down south so I don't get to see them much. We do talk via email and Facebook. You can follow him over there and get your own, more immediate updates rather than just the castles I like.

I've never seen this castle in person, but from the details I guess that it's 25 mm.
It's impressive from an angle.
And the side. I suspect this is fairly small, perhaps a little less than 3 feet by a little over 4 feet.
Dad works in Styrofoam, but then adds details of plastic and wood. He skims the structures in plaster to get that texture.
As you can see, he uses a simple dry brush style.
Note the difference from the stonework on the bottom of the walls vs. the plastered look of the top.
One of the painting tricks I picked up from my Dad was an item will look realistic if it repeats the colors from the surrounding terrain.
You can see the castle shares the same colors as the rock it sits on.
This building is obviously worn, another technique that makes an item look authentic.
This angle shows the details of the stairs and such. Funny, this model is made for figures on bases, so their tiny feet can never reach the stairs.
I'm going to leave the last couple of images comment-less, but check out Classical Hack on the web or over on DriveThruRPG.

A walk down memory lane... thru a Motte and Bailey Castle.

The Shell Keep
Overview of the keep Ah, memories. My dad has been a gamer since he was a child. His collection of books, resources and material is unsurpassed. When I was in high school, I needed to write a report on the Middle Ages. Obviously, he wanted to help. What I didn't expect was, he told me to bring my whole class. A horde of kids came in to our house for a lesson on the Middle Ages. Hand on, armor, swords, models, books, and history. On whim.
Gate and decking work. He was always like that. When I was a toddler, I recall a massive Motte and Bailey castle in our living room. And some times part of the dining room and kitchen. It was a huge undertaking. I have no idea where that castle went, perhaps it was broken in our many moves from the projects in Lockport to the Eastside of Buffalo and finally to Tonawanda. It wasn't the only castle he had, it was one of dozens.
Side view These pictures are of a castle in the classic motte and bailey design that I loved so much. I'm not sure when dad started building this, perhaps Dad doesn't know when he started building this, but here it is. Sometime in 2018 or 2019, perhaps. This one is 4 by 3 feet. It's tiny compared to some of the work he has done.
Inner gate detail.  This is my favorite view of the Keep. Dad always painted details on his gates, in classic blue, yellow and red. I am not sure of the historical details of those colors, but these remind me of Dad.
Inner ward This shell keep has 3 inner buildings, with multiple floors. Since this is used for a wargame, the rooves, floors and ceilings come off.
Opposite side view. This is a work in progress, so the exterior details are missing. There will be trees, stones, grass and perhaps water features in the finished work.
Rooves Again, the windows and doors have those colors.
Rooves and floors removed. The interior is incredible.
Second floor in place.  In this view, you can see the doorways leading to the interior spaces. When he builds these things, he scales them 15 or 25 mm. I suspect this one is 25 mm.
Other buildings, rooves removed.  The scale is important because wargamers use a particular basing for the figures. He needs to be able to fit those bases inside the structures.
Possibly a kitchen area. Not every part of the keep is for military purposes. This is a cooking area.
Main gate, roof removed.  I love the way he plans areas to be removed for the game action. This is the main gate.
Walkway of the parapet removed. Latrine area.  And bathrooms in the walls. Waste would fall into the moat, for an extra deterrent.
The Bailey.  The exterior area has a couple of buildings, with thatched and wooden rooves.
Interior with rooves.  The Keep has stone or tile rooves, not show in this image. The smaller building have blue slate. That is my favorite color.
The Keep I love the circular pattern of the keep's ward.
Bailey gate.  And finally, our journey ends at the outer gate.
If you want to see more like this be sure to check out my dad on Facebook and on the web. Classical Hack on Facebook Classical Hack on the web